Advertisement
IC MOTOR INSTALATION
MOTOR
Using the supplied bolts, nuts and washers attach the engine mount to the firewall via the capture nuts pre installed
as per picture. You will have to shave the corners off the engine mount where it hits against the projection box
Mount your chosen motor (West 52T1 recommended) to the supplied mount ensuring that when you fit the cowling
the prop drive protrudes past the cowling. Please note the pipe is at 5 o'clock and the cylinder head will be at seven
o'clock.
FUEL TANK
.Once you are happy with your fuel tank install it into the fuel bay with some foam and straps. If you are requiring a
a three pipe system you will need to add the extra pipe to the tank for filling
It will be necessary to fuel proof the
engine box and fuel tank bay to eliminate fuel contamination.
Advertisement
