Introduction To The Océ Varioprint 6000 Micr Line - Canon Oce VarioPrint 6000 MICR Series Operation Manual

Table of Contents

Advertisement

Introduction to the Océ VarioPrint 6000 MICR line
Introduction to the Océ VarioPrint 6000 MICR line
Introduction
The Océ VarioPrint 6000 MICR line is a series of high-volume, cut-sheet printers. These printers
support magnetic ink character recognition (MICR). MICR printing is intended primarily for
transaction printing of valuable documents like cheques. A magnetic reader can read documents
printed with MICR toner.
The Océ VarioPrint 6000 MICR line uses the Océ Gemini Instant Duplex Technology. This
technology enables the machine to print MICR toner on both the front side and the back side of a
sheet at the same time. Depending on your version, the sustained print speed, including
reconditioning, ranges from 182 to 221 to 272 images per minute when you print a 2-sided A4
document. For a 2-sided Letter document the sustained print speed ranges from 177 to 216 to 266
images per minute.
The print speed for 1-sided A4 documents ranges from 127 images per minute to 157 images per
minute. For 1-sided Letter documents the print speed ranges from 124 images per minute to 153
images per minute.
The Océ VarioPrint 6000 MICR line prints only with MICR toner. A combination of MICR toner and
regular toner is not possible. However, you can also print regular documents with MICR toner.
This section provides a short description of the main features of the printer.
Overview of the main features
• Support of magnetic ink character recognition (MICR) printing
• Océ Gemini Instant Duplex Technology that enables the printing of both sides of a sheet at the
same time.
• Advanced scheduling concept on the control panel to keep the machine running.
• Load and assign the media while the printer prints.
• Unload the media while the printer prints
• Assign the media while the printer warms up, after the printer is initialized.
• Support of up to 12 paper trays (total input capacity up to 13,800 sheets) and a roll feeder.
• Support of up to 3 stackers, a finisher and other external finishers.
• Support of a large range of media, media sizes and media weights.
• Support of secure printing.
• Support of APPE (Adobe PDF Print Engine), IPDS/PS/PCL/PDF and streaming PS.
• Support of a large range of software products, for example the Océ PRISMA series, Xerox
FreeFlow
• Support of RDO files via Océ DP Link.
8
Chapter 1 - Introduction
®
.
®
Océ VarioPrint 6000 MICR line

Advertisement

Table of Contents
loading

Table of Contents