MTI FREEDOM CORE II Series Install Manual page 4

PROGRAMMING
1
If using the Screamer Sensor ONLY,
the SmartCable will not be present
2
The MCP will beep once the cable is inserted. Press
MCP button once, wait for the beep, then press again.
When the light on the Intellikey turns green, you have
successfully programmed the key and power sensor.
ARMING
1
NOTE: LED is solid white.
2
NOTE: LED is solid white.
MTI 1050 NW 229th Avenue Hillsboro, OR 97124 T:800.426.6844 www.mobiletechinc.com
FREEDOM CORE II™ USER GUIDE
If the key does not turn green,
repeat programming steps above.
MTI P/N 063-1559-00 rev B ©2014 MTI All Rights Reserved
4