Cater-Wash CK8514 Trouble Shoot

Cater-Wash CK8514 Trouble Shoot
Please always maker sure you have removed the travel bolts.
To find error codes
1. Turn the washing machine on.
2. Press 'temp' then 'ewash' then 'temp' then 'ewash' - Door will lock
3. Wait 10 seconds
4. T01 will display on the screen
5. Turn dial to T02 and press start . Any error codes will show on the screen now.
Fault
Washing machine
stuck on pause
Washing machine
stuck on pause or not
spinning.
Washing machine
stuck on pause.
Detergent not entering
washing machine.
Error Codes Action
Filling problems. - Make sure the
customers water pressure is above
22, 23 0.5 bar. Make sure there is no
obstructions inside inlet hose. Make
sure Solonoid is not leaking.
Draining problems. Make sure the
customers filter is empty. Unscrew
the filter on the bottom right of the
washing machine with a tray
31
underneath and check not clocked.
Check the drain hose is clear. Check
the electrical connections to the drain
pump.
Dispenser problems. Check for
obstructions in the despenser. Check
38, 39
electical connection of the water
valves.
Still not fixed.
Replace solonoid.
Replace drain pump
CKP0226
Replace the dispenser
motor.
Run
test
T06,
T09
T05