Advertisement
Do not use metal polish as this is suitable not to clean the antique finish and could result in
loos of the color and patina. Oxidation that may appear over time on the burnished brass
surfaces is a normal characteristic of our craft metal working processes.
CLEANING CHROME PLATED BRASS SURFACES
No synthetic varnishes have been used to obtain the special polish on the chromium-plated
brass details in order to avoid spoiling the beauty of the chrome with an artificial patina. All
the chromed surfaces should be clean as needed with a warm water and mild soap and a
soft cloth or micro-fiber. Do not use abrasive pads.
CLEANING SATIN FINISH NICKEL PLATED BRASS SURFACES
No synthetic varnishes have been used to obtain the special nickel-plating on the satin
finish nickel-plated brass details in order to avoid spoiling the beauty of the nickel-plated,
satin finished solid brass with an artificial patina. All the nickel-plated and satin finished
brass surfaces should be cleaned, where necessary, with a soft cloth or micro-fiber cloth,
combined with a neutral detergent, if required. Do not use abrasive pads.
CLEANING THE VARNISHED SURFACES
All the varnished surfaces should be cleaned using a neutral detergent and, where necessary,
a soft cloth or micro-fiber cloth. Do not use abrasive pads or any other chemical products.
CLEANING BRUSHED STEEL SURFACES
All the brushed steel surfaces should be cleaned using degreasing products or products
specifically designed to be used on steel and, where necessary, extra-fine steel wool.
WHAT TO DO IN THE EVENT OF A BREAKDOWN
In the event of breakdown, turn off the appliance, disconnect the power supply and notify
your authorized service center or call our main line at (800) 781-7125
11
Officine Gullo
Advertisement
