Advertisement
English
Initial Setup
Essential Setup
1. Place the unit on a flat and level surface. The selected location should be
stable and free from vibration.
2. Unwind the A/C Power Cord at the back of the unit and connect it to a power
outlet.
3. Plug A/C cord into appropriate outlet.
4. Untie the FM Antenna and allow it to hang in a straight line.
Radio Operation
1. Turn the unit ON by turning the On-Off Switch/Volume Control clockwise to
the ON position.
2. Select the desired waveband by turning the Function Knob to either the AM or
FM position.
3. Turn the Tuning Knob to select the desired station on the Tuner Dial.
4. Adjust the volume to the desired listening level by turning the On-Off
Switch/Volume.
5. Turn the unit off by turning the On-Off Switch/Volume counterclockwise to the
off position.
Note:
The unit is equipped with a FM wire antenna. To FM improve reception, move the
wire around until the reception is clear without interferences. Do not connect the wire
to any additional antenna.
The AM antenna is built inside the unit. If AM reception is poor, try to rotate the unit
for better reception.
Bluetooth Operation
1. Turn the unit ON by turning the On-Off Switch/Volume Control clockwise to
the ON position.
2. Turn Function Knob to the Bluetooth mode, the Tuner Dial will light will
change to blue.
3. Turn on the Bluetooth feature of your audio device, search for "Crosley CR31"
and pair.
4. Play and stream music from your device to the unit.
Note:
Bluetooth version - 4.2
5
Advertisement
