Advertisement
English
Initial Setup
Essential Setup
1. Place the unit on a flat and level surface. The selected location should be
stable and free from vibration.
2. Connect the power plug to the Power Jack of the unit.
Note: Do not plug the power plug to the power outlet before all the assembly is
completed. Before turning the power on, make sure again all the connection settings
are correct. Always turn off the power when connecting or disconnecting.
Battery Backup
1. Press in on the locking tabs to remove the battery cover.
2. Insert 4 AA batteries into the battery compartment.
3. Insert tabs into battery compartment and push locking tabs in place.
Volume Control
Rotate the On/Off Volume Knob clockwise and counterclockwise to raise and
lower the volume.
Aux Input Connection
You can connect an audio device to this unit and play your music through its
speaker. To do this, connect the 3.5mm auxiliary cable (not included) between
your audio device and the Aux In Jack.
Note: The aux in connection has the highest priority of all the functions. When there is an
auxiliary cable plugged in, the aux in connection will automatically override the Bluetooth or
radio functions. To resume using the other features of the unit, unplug the auxiliary cable
from the aux in jack.
Bluetooth Operation
1. Set the Function Switch to Bluetooth mode
Note: The Bluetooth indicator will be flashing blue.
2. Turn on the Bluetooth feature of your audio device, search for "CROSLEY
CR3041A" and pair.
3. Once your device is successfully paired with the unit, you will hear a short
confirmation sound from the unit, and the Bluetooth indicator will be blue.
4. Play and stream music from your device to the unit.
Note: Bluetooth version – 5.0
5
Advertisement
