LG CordZero A9 S Owner's Manual page 14

us_main.book.book Page 14 Tuesday, March 31, 2020 5:28 PM
14 INSTALLATION
Wall-Mounted Installation
For wall-mounted installations, the charging
station must be attached securely to the wall using
the provided (short) wall anchoring screws.
• The detachable nozzle storage cannot be
attached to the charging station in a wall-
mounted installation.
1
Connect the power adapter to the port on the
back of the charging station.
2
Drill 2 holes and insert the drywall anchors (if
needed) at least 3.25 ft (1 m) from the floor
and near enough to easily reach a power
outlet.
• Before drilling, make sure that there are no
pipes or electrical wires inside the wall at
the desired location.
• For drywall anchor: use 1/4" (6.5 mm) drill
bit
• For concrete or wall stud: use 1/8" (3 mm)
drill bit
• If screwing into drywall, use the drywall
anchors.
3
Attach the charging station to the wall with
the wall anchoring screws.
4
Plug the power cord into the power outlet.
3.25 ft
Compact Installation
For safety and convenience, install the charging
station using the self-standing or wall-mounted
installation methods. If you choose not to install
the charging station, place it on a level floor for
charging or storage.
1
Connect the power adapter to the port on the
back of the charging station.
2
Place the charging station on a hard and level
floor.
3
Separate the extension pipe and nozzle from
the product body before charging or storing
the appliance.
4
Plug the power cord into the power outlet.
CAUTION
• Leaving the appliance on a level floor for a long
time with the extension pipe and nozzle
attached may damage the appliance.