Wiring Connection - LG MULTI V TJ Series Installation Manual

Hanging bolt
(W3/8 or M10)
Nut
(W3/8 or M10)
Spring washer
(M10)
• The following parts are local purchasing.
Hanging Bolt - W 3/8 or M10
Nut - W 3/8 or M10
Spring Washer - M10
Plate Washer - M10

Wiring Connection

Connect the wires to the terminals on the control board individually according to the outdoor unit connection.
• Ensure that the color of the wires of outdoor unit and the terminal No. are the same as those of indoor unit respectively.
Terminal Block Indoor
1(L) 2(N)
INDOOR POWER INPUT
WARNING : Make sure that the screws of the terminal are free from looseness.
Keep the length of the bolt
from the bracket to 40mm
Flat washer for M10
(accessory)
Ceiling board
Flat washer for M10
(accessory)
Nut
(W3/8 or M10)
Adjust the same height
Indoor
unit
3 4 A B E
Ceiling
Air Conditioner body
Paper model Set screw of
paper model (4 pieces)
for installation
Open the ceiling board
along the outer edge of the
paper model
CAUTION : Tighten the nut and bolt to
prevent unit from falling off.
Outdoor Central
unit
controller
F C D Vcc GND
Installation
Ceiling board
Main
outdoor unit
Installation Manual 9