Brother GT-3 Series Install page 2

7 . Open the front cover.
8 . The example being shown is for the color print heads, when installing the white print
heads, prepare maintenance solution, maintenance cartridge, and follow the
prompts on the screen.
9. Remove the plastic cove
(encoder pcb cable), and disconnect the four tabs (2 on each side), and lifting the
cover over the large capacitor.
1 0. Pull out the black tabs on both edges of the flat cable on the carriage PCB for
preparation to insert the print head.
11. Remove the print head from the box and hold it by the front portion.
r on the carriage PCB by disconnecting the white cable