Colorado time systems System 6 User Manual page 70

Swimming software does
not register pad or finish
button/backup button.
Trouble Shooting Chart Input System
This section addresses input system problems only. Try the suggested remedies exactly as given,
one at a time and in the order listed. Be sure to record the remedies tried and their results for
future reference.
Problem
Start system does not start
race time
66-Appendix A: Maintenance
2) Clean Connectors.
3) Check cabling.
4) Check start system.
1) The timer must be ready
for a pad hit. Ensure that the
pad armed indicator is
displayed in the appropriate
lane(s).
2) Confirm that lane
mapping is set properly for
the lane(s).
3) Make sure touchpad and
button cables are properly
and securely connected.
4) Clean connectors
5) Check cabling.
6) Check touchpad(s) or
button(s).
Remedy
1) Make sure start system
cable is properly attached.
2) Clean connectors.
3) Check cabling.
4) Check start system.
Refer to page 62
Refer to page 63
Refer to page 64 or start
system manual.
Refer to Chapter 4 for
complete instructions
Refer to Chapter 4, Setups
Menu, Pool setups (page
45)
Refer to Chapter 2
Refer to page 62
Refer to page 63
Refer to page 70
Notes
Refer to Chapter 2 or start
system manual for
instructions
Refer to page 62.
Refer to page 63
Refer to page 69 or start
system manual.