Colorado time systems System 6 User Manual page 62

Print Yes/No
Function: Used in conjunction with the Print Meet softkey. Each race in memory is
automatically set to print when you press Print Meet, but it is sometimes desirable not to print
every race in a meet. For example, if a race was used to test the touchpads and then stored, it
should not be printed.
Operation: To prevent the results of a given race from being printed, display that race on the
screen and press the Print Yes/No softkey. This softkey toggles between print status of the
displayed race on and off.
False Start
Function: Allows you to label a race in memory a false start. False start races are not printed on
any printout.
Operation: Display the desired race on the screen and press this softkey to mark it as a false
start. This softkey toggles false start on and off. This should ONLY be used on races that were
called back because of a FALSE START. Many of governing bodies do not charge the swimmer
with a FALSE START until the race is over. In this case the race is GOOD and only the
individual swimmer should be charged with the FALSE START, not the heat.
Edit/DQ
Function: Allows you to edit the results of the past races stored in memory if necessary, to
correct an error.
Operation: Display the desired race on the screen and press this softkey to access the editing
features. Press the Edit Time softkey and type the lane number you want to edit. Select the
correct backup time from the softkey menu or press C/E and type a stopwatch time. The
Swimming software calculates any changes in finish order based on the new time.
To disqualify a swimmer, display the desired race on the screen and press the Edit/DQ softkey.
Press the DQ softkey, type the appropriate lane number and press enter. Repeat the procedure to
un-DQ a disqualified swimmer.
The NP button allows you to designate a swimmer with a "Non-Participant." To mark a
swimmer "NP," press the NP sofkey, type the appropriate lane number and press enter.
Scoreboard Post
Function: Allows you to post the results of the currently selected race.
Operation: Press this softkey and select the desired options from the softkey menu to post the
results of the currently selected race. The softkey allows you to display results by lane or by
place. If the number of scoreboard lines (Option 4 in Scoreboard, page 47) is less than the
58-Reference: Softkeys