Advertisement
Quick Links
Yamaha FX HO 2012-2018 Instructions
For the best support, please watch our installation video on our website here:
***Note: keep all buckles on port (left) side of ski.
Extra washers should be used as backing washers
inside hull for all rivets.
https://highsurfrescue.com/portfolio/strap-kit/
Download color copy at
https://highsurfrescue.com/resources/
Provided: Straps & Hardware
Needed: Drill, 3/16 Drill Bit & Rivet Gun
#1 – #4 Straps denoted in the order that
they are attached to the ski from bow
(front) to stern (back)
Advertisement
Related Manuals for Yamaha FX HO 2012
Summary of Contents for Yamaha FX HO 2012
- Page 1 Yamaha FX HO 2012-2018 Instructions For the best support, please watch our installation video on our website here: https://highsurfrescue.com/portfolio/strap-kit/ Download color copy at https://highsurfrescue.com/resources/ ***Note: keep all buckles on port (left) side of ski. Provided: Straps & Hardware Needed: Drill, 3/16 Drill Bit & Rivet Gun Extra washers should be used as backing washers #1 – #4 Straps denoted in the order that inside hull for all rivets. they are attached to the ski from bow (front) to stern (back)
- Page 2 STEP #1 STEP #2 Align the #2 strap by placing the strap Hole in #1 strap sandwiches in hatch. over the glove box. Align ends that will be Loosen bolt in photo, slide strap in between riveted with trim on each side. Using strap plastic and align hole with bolt. Re-fasten mark holes where drilling is needed. Drill bolt. Close hatch, with strap dangling, place holes, attach rivets and repeat for opposite bracket parallel with the hatch. Using the side. brackets, mark holes where drilling is needed. Drill holes, attach rivets and repeat for opposite side. STEP #3 STEP #4 Align the # strap (with handle) on the rear Align the #4 strap on the rear of the rear of the front seat. Level bracket, using seat. Using strap, mark holes where bracket mark holes where drilling is drilling is needed. Drill holes, attach rivets needed. Drill holes, attach rivets and and repeat for opposite side. repeat for opposite side.