Linx HumPRC Series Data Manual page 41

EEXMASK - Extended Exception Mask
Volatile Address = 0xD0-0xD2; Non-Volatile Address = 0x80-0x82
These registers contain a mask for the events in EEXFLAG, using the same
offset and bit number.
HumPRC Series Extended Exception Mask Registers
TM
Volatile Non-Volatile
Name
Address Address
EEXMASK2 0xD0 0x80
EEXMASK1 0xD1 0x81
EEXMASK0 0xD2 0x82
Figure 80: HumPRC TM Series Transceiver Extended Exception Mask Registers
To use this value, register EXMASK must be zero. If EXMASK is non-zero,
this register has no effect on the EX line.
When an exception bit is set in EEXFLAG, the corresponding EEXMASK
bit is set, and EXMASK is zero, the EX status line is set, otherwise the
EX line is reset. Mask bits for unassigned flags should be zero for future
compatibility.
PKTOPT - Packet Options
Volatile Address = 0xD3; Non-Volatile Address = 0x83
This register selects options for transferring packet data in the HumPRO
Series. These options are controlled automatically by the HumPRC
application and do not have any effect on its operation.
Description
Byte 2 of the extended exception mask
Byte 1 of the extended exception mask
LSB of the extended exception mask
TM
– –
76
LASTNETAD - Last Network Address Assigned
Non-Volatile Address = 0x8C-0x8F
These bytes contain the last address assigned using the Join Process.
When a new unit joins the network, it is assigned the next address
and this value is incremented in the administrator. It is initially set to the
administrator address when a network key is generated.
HumPRC Series Extended Exception Mask Registers
TM
Name
LASTNETAD3
LASTNETAD2
LASTNETAD1
LASTNETAD0
Figure 81: HumPRC
TM
TM
Non-Volatile
Description
Address
0x8C MSB of the last network address assigned
0x8D Byte 2 of the last network address assigned
0x8E Byte 1 of the last network address assigned
0x8F LSB of the last network address assigned
Series Transceiver Extended Exception Mask Registers
– –
77