[Date & Time] Tab - Sony MAS-A100 Operating Instructions Manual

[Date & Time] tab
[Current Date & Time]
Displays the set date and time of the unit.
Note
The date and time set at the time of purchase
may not be accurate. Always check the setting.
[PC Clock]
Displays the date and time of the computer
being used.
[Date & Time Format]
Select the date and time format to display.
You can select [yyyy-mm-dd hh:mm:ss], [mm-
dd-yyyy hh:mm:ss], or [dd-mm-yyyy hh:mm:ss].
[Time Setting]
Select the method for setting the date and time.
[Keep current setting]: Select to keep the
current settings for the date and time of the
unit.
[Synchronize with PC]: Select to synchronize
the date and time of the unit with the date
and time of the computer.
[Manual Setting]: Select to set the date and time
of the unit manually. Specify a value in the
[Current Date & Time] field.
[Synchronize with NTP]: Select to synchronize
the date and time of the unit with the NTP
(Network Time Protocol) server of a time
server. If you select [Synchronize with NTP],
specify the NTP server.
[NTP Server]
Synchronize using the entered NTP server
address.
[Time Zone]
Set the time zone for the region in which the unit
is installed relative to Greenwich Mean Time.
Note
If the time zone selected in [Time Zone] and the
time zone of the computer are different, a date
and time reflecting the difference in time zones
is set on the unit.
To adjust for Daylight Savings Time
automatically
Place a check mark in [Automatically adjust for
Daylight Savings Time.] to automatically adjust
the time for daylight savings time (summer time)
in the selected time zone.
23