Operating The Vacuum Cleaner - Samsung VS20R90 Series User Manual

Operating the vacuum cleaner

When the brush clings to the floors such as a carpet, a mat, bedding, etc. or does not spin
properly, change the suction power to 'MIN' or 'MID' mode.
01
04
20 English
Power ( ) on / off
When pressing the power button, the vacuum
cleaner starts operation in 'MID' mode.
• When the wet brush is assembled,
operation starts in 'WET' mode.
Controlling suction power
You can control the suction power of the
vacuum cleaner.
• + button: Increases suction power.
• - button: Decreases suction power.
❇ ❇ The suction power control button does not
work in WET mode.
Checking the display
02
01 Clogged: When the dustbin, pipe, or
03
suction part is clogged
02 Spinning brush stuck: When a foreign
matter is clogged at the spinning brush
❇ ❇ If the overheating prevention device of
05
the motor works, the spinning brush stuck
display will not turn on.
03 No Filter: When the washable micro filter
is not assembled correctly
04 Suction power: Displays current suction
power.
05 Wet brush cleaning mode: When the wet
brush is assembled
❇ ❇ If the display above 01, 02, or 03 blinks a
few times and the vacuum cleaner stops
operation, please take action by referring
to the maintenance part of this manual.