Table of Contents
Advertisement
COPYRIGHT
Copyright© by Align Technology Inc. 2016. All rights reserved.
The information contained in this manual is subject to change without notice.
The hardware and software described in this manual are supplied under a Sales and Services Agreement
and may be used only in accordance with the terms of that agreement.
No part of this manual may be reproduced, photocopied, stored in a retrieval system, or transmitted in any
manner (electronic or mechanical) for any purpose other than the customer's normal usage, without the prior
written permission of Align Technology Inc.
This manual describes the iTero® Element'" Optical Impression Device.
English language version.
TRADEMARKS
The following are trademarks and/or service marks of Align Technology, Inc. or one of its subsidiaries or
affiliated companies and may be registered in the U.S. and/or other countries: Align Technology Inc., iTero®
Any other trademarks or registered trademarks appearing in this manual are the property of their respective
owners.
USA OFFICE
Corporate Headquarters
Align Technology, Inc.
2560 Orchard Parkway
San Jose, California 95131
www.aligntech.com
Tel: +1 (408) 470-1000
Fax: +1 (408) 470-1010
CUSTOMER SUPPORT
Tel: +1 (800) 577-8767
E-mail:
iterosupport@aligntech.com
E-mail:
orthocadsupport@aligntech.com
ISRAEL OFFICE
Align Technology Ltd.
3 Ariel Sharon Blvd.
OrYehuda 6037606
Tel: +972 (3) 634-0020
Fax: +972(3)634-1440
NETHERLANDS OFFICE
International Headquarters
Align Technology B.V.
Arlandaweg 161
1043 HS Amsterdam
Tel: +31 (0) 20-586-3600
Fax: +31 (0) 20-586-3751
EUROPEAN AUTHORIZED REPRESENTATIVE
Obelis s.a.
Boulevard General Wahis 53
B - 1030 Brussels, Belgium
www.obelis.net
Tel: +32.2.732.59.54
Fax: +322.732.60.03
E-mail: zmail@obelis.net
Advertisement
Table of Contents
Need help?
Do you have a question about the Element and is the answer not in the manual?