Advertisement
11
Attach the base (11)
(with the information
label facing upwards) by
lowering it onto the base
brackets. Ensure that the
g
threaded ends of the base
brackets fit into the holes
in the corners of the base.
Push the base bracket
nuts (g) into the holes in
the corners of the base
and screw them onto
the threaded ends of
the base brackets using
the flat head screwdriver
supplied.
There are four screw holes
in the cot ends that are
used for the construction
of the cot only. These
must be plugged using
the blanking bolts (I).
Screw the four blanking
bolts into the holes in the
cot ends from the inside,
see diagram.
Tighten the blanking bolts
into the cot ends using
the long end of the allen
key (J).
i
J
-14-
Advertisement
