OPERATION
First use
Before using your blender for the first time you should ensure
that the components are thoroughly cleaned.
•
Follow the instructions in the Care and Cleaning section to
clean all components thoroughly before first use.
Fitting the blender stem
The blender stem should be fitted to the motor body before use.
•
Fit the motor body onto the stem with the
on the motor body aligned with the
shown.
PAGE 6
•
unlock marking
pointer on the stem as
The stem will be locked in place.
Removing the blender stem
•
•
Twist the motor body clockwise until the
aligned with the
pointer.
Twist the motor body anti-clockwise until the
marking is aligned with the
pointer.
Lift the stem off the motor body.
HB1908K-SA
lock marking is
unlock