After Use; Storage; Care And Cleaning; Motor Body - Adesso HB1908K-SA Instruction Manual

AFTER USE

• When you have finished using the blender, disconnect the
power cable and dismantle the stem from the blender.
• Immediately after use, follow the instructions in the Care and
Cleaning section to clean the components you used.

Storage

• When all the components are dry, coil the power cable
loosely and store the blender set out of reach of children
and pets. The motor body includes a hanging loop if required,
never hang the appliance by the mains cable.
PAGE 8

CARE AND CLEANING

Never clean any of the blender components with scourers,
abrasive pads or chemicals.
The blender components are not dishwasher safe.
• Disconnect the blender motor body from mains power before
cleaning it and remove the stem.

Motor body

• The motor body must never be immersed in water. Wipe it
with a damp cloth and dry thoroughly.

Blender stem

• Wash the blender stem under hot, running water and stand it
vertically to drain. Dry thoroughly before storage.
NOTE: The stem may be damaged if submerged.

Jug

• Hand-wash the jug in a mild detergent solution. Dry
thoroughly.

SPECIFICATIONS

Power supply ...........................................................220 - 240V~, 50Hz
Power consumption.................................................................... 200W
Class II double insulated.
E285
HB1908K-SA