Table Of Contents; Specifications; General Safety Information - Dyna-Glo EG4800DG Installation & Maintenance Instructions Manual

ITEM

SPECIFICATIONS ...........................................................................

SAFETY INFORMATION .................................................................
Installation ...............................................................................
Operation ....................................................................................
Maintenance ..............................................................................
Replacement Parts .................................................................
Troubleshooting ....................................................................
Voltage
Frequency
Output Power (Watts)
Electric Current (A)
Dimensions
Net Weight

GENERAL SAFETY INFORMATION

Prior to operating heater, make sure the electrical outlet is of the
configuration and capacity appropriate for the heater. See outlet
configuration on front page of manual. This heater is for use on
240 volts. The cord has a plug as shown in Figure 1. No adapter
is available for this blade configuration, and none should be used.
The type outlet is a 240 volt grounding outlet. When properly
installed, it provides a ground connection through the cord to the
heater to protect the operator from electric shock.
BE CAREFUL NOT TO DIRECT THE HEATER TOWARD DRAPERIES, FURNITURE, OR OTHER
OBJECTS THAT COULD BE DAMAGED BY HEAT. DO NOT PLACE THE HEATER WHERE A SMALL
CHILD MAY FALL OVER THE HEATER. DO NOT PLACE THE HEATER WHERE THE POWER CORD
MAY BE WALKED ON, TRIPPED OVER OR OTHERWISE SUBJECTED TO HARD USAGE.

TABLE OF CONTENTS

SPECIFICATIONS
270 mm x 245 mm x 325 mm
16.5 LBS / 7.48 KGS
SAFETY INFORMATION
WARNING
3
PAGE #
3
3
4
4
5
5
6
EG4800DG
240 V
60 Hz
4800 W
20 A
GROUNDING PIN
Figure 1