Panasonic PT-VMZ50 Operating Instructions Manual page 116

Functional manual
Hide thumbs Also See for PT-VMZ50:
Table of Contents

Advertisement

1
[LIGHT POWER]
Displays the [LIGHT POWER] setting.
2
[AUTO POWER SAVE]
Sets to [ON] when setting [AMBIENT LIGHT DETECTION] and
[SIGNAL DETECTION].
3
[AMBIENT LIGHT DETECTION]
Selects to enable ([ON])/disable ([OFF]) the environmental
luminance interlock function.
4
[SIGNAL DETECTION]
Selects to enable ([ON])/disable ([OFF]) the no signal interlock
function.
Note
f For details of each setting item, refer to the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] (x page 84) on the projector.
[E-mail set up] page
When there is a problem or the runtime of a luminous lamp reaches a set value, an E-mail can be sent to preset
E-mail addresses (up to two addresses).
Click [Detailed set up] → [E-mail set up].
1
[ENABLE]
Select [Enable] to use the E-mail function.
2
[SMTP SERVER NAME]
Enter the IP address or the server name of the E-mail server
(SMTP). To enter the server name, the DNS server needs to be
set up.
3
[MAIL FROM]
Enter the E-mail address of the projector. (Up to 63 characters
in single byte)
4
[MEMO]
Enter information such as the location of the projector that
notifies the sender of the E-mail. (Up to 63 characters in single
byte)
116 - ENGLISH
Chapter 5 Operation of Function - Web control function
5
[POWER MANAGEMENT]
Selects the power consumption mode.
6
[TIMER]
Selects the time that the light source is turned off when the
POWER MANAGEMENT function is using.
7
[QUIK STARTUP]
Displays the [QUICK STARTUP] setting.
8
[VALID PERIOD]
Select the valid period until the [QUICK STARTUP] function is
disabled after going into the standby mode.
9
[Submit]
Updates the settings.
5
[MINIMUM TIME]
Change the minimum interval for the temperature warning
E-mail. The default value is 60 minutes. In this case, another
E-mail will not be sent for 60 minutes after sending the
temperature warning E-mail even if it reaches the warning
temperature.
6
[INTAKE AIR TEMPERATURE]
Change the temperature setting for the temperature warning
mail. A temperature warning E-mail is sent when the
temperature exceeds this value.
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt-vmz40Pt-vmw50

Table of Contents