Subscribe to Our Youtube Channel
Related Manuals for Super Tramp Polymesh Wallaby Bed
Summary of Contents for Super Tramp Polymesh Wallaby Bed
- Page 1 Replacing A Polymesh Wallaby Bed A ‘HOW TO’ GUIDE Adult installation required Read User Guide before installation Please keep this guide for further reference Tel: +44 (0)1884 675801 | www.supertramp.co.uk | sales@jetsports.co.uk...
- Page 2 Replacing your Rectangular Wallaby Trampoline Bed STEP First, you will need to remove your old bed from the trampoline. Begin by removing a spring from the frame using a spring tool, then cross over to the other side of the trampoline and remove the opposite spring.
- Page 3 STEP Remove the packaging from your new bed and unfold it on the ground inside the trampoline frame. Make sure the painted markings are facing upwards. Standard Hook TO ORDER SPARES If you require replacement anchor straps or springs for your Boomer, these can be ordered though our website: www.supertramp.co.uk Using a...
- Page 4 STEP Using the diagram below as an example, begin to fit the new bed to your trampoline following the sequence 1-10. You should continue to work at opposites at all times to evenly distribute the tension through the bed, (Example shows following the numbers within squares to eventually fitting the remaining springs until all 74 springs are attached.
Need help?
Do you have a question about the Polymesh Wallaby Bed and is the answer not in the manual?
Questions and answers