Blaupunkt Alaska CJ70 Operating Instructions Manual page 30

You can use the connections provided on your
car radio to connect an external pre-amplifier
and a subwoofer.
We recommend that you use matching prod-
ucts from the Blaupunkt or Velocity ranges.
To prevent speakers from crackling when you
switch on the player, you can set a switch-on
delay for all amplifiers connected to the Pre-
amp Out connection. The maximum delay is
four seconds.
Press the MENU button, 8.
Press the or
as is necessary for "AMP DLAY" to ap-
pear in the display.
Press the or
to adjust the switch-on delay.
"DLAY OFF" means that there is no switch-
on delay, while "DELAY 1" to "DELAY 4" indi-
cate the delay time in seconds.
Press the OK button, 5 or the MENU
button, 8, to leave the menu. The set-
tings are then saved.
button, 7, as often
buttons, 7, in order
Output power:
Wavebands:
VHF (FM) :
MW :
LW :
FM frequency response:
Frequency response:
4 channels:
Sensitivity:
Subject to technical change!
4 x 25 Watt sine wave
according to
DIN 45 324 at 14. 4 V
4 x 45 Watt max. power
87.5 – 108 MHz
531 – 1,602 kHz
153 – 279 kHz
30 - 15,000 Hz
20 - 20,000 Hz
4 V / 10 k
1,2 V / 10 k
57