Technical Specifications; Troubleshooting Guide - Beurer BY90 Instruction Manual

• Do not clean the baby scale in the dish washer.

10. Technical Specifications

Battery type:
Measuring range:
Weight unit:
Temperature operating range: 50°F to 104°F (10°C to 40°C)
Storage temperature range:
Scale size:
Net weight of scale:
Subject to technical modifications.
Notes on electromagnetic compatibility
• The device is suitable for use in all environments listed in these instructions for use, including domestic
environments.
• The use of the device may be limited in the presence of electromagnetic disturbances. This could result in
issues such as error messages or the failure of the display/device.
• Avoid using this device directly next to other devices or stacked on top of other devices, as this could lead
to faulty operation. If, however, it is necessary to use the device in the manner stated, this device as well
as the other devices must be monitored to ensure they are working properly.
• The use of accessories other than those specified or provided by the manufacturer of this device can lead
to an increase in electromagnetic emissions or a decrease in the device's electromagnetic immunity; this
can result in faulty operation.
• Failure to comply with the above can impair the performance of the device.

11. Troubleshooting Guide

Display
Incorrect weight
displayed
3x 1.5 V AAA batteries (LR03)
0.11 lb to 44 lb (0.05 kg to 20 kg/1.76 oz to 705 oz)
0.01 lb (5 g/0.18 oz)
14°F to 122°F (-10°C to 50°C)
22 in x 13 in x 1.85 in (560 x 330 x 47 mm)
approx. 3 lb (1.36 kg)
Cause
No flat, stable surface.
The maximum weight capacity
of 44 lb (20 kg/705 oz) has
been exceeded.
No flat, stable surface.
The baby is wriggling too
much.
Incorrect zero point of scale.
Solution
Place the scale on a flat, non-carpeted surface.
Re-tare the scale.
Only weigh the maximum permissible weight.
Place the scale on a flat, non-carpeted surface.
Re-tare the scale.
Try to calm the baby so that it stops wriggling.
Switch the baby scale off and on again. Wait
until the scale displays „0.00 lb" and repeat the
measurement.
8