Basic Settings - Blaupunkt DX-V Operating Instructions Manual

System settings

Basic settings

1. Mark on the top line of the "Settings" menu. Press
The sub-menu for audio/video settings will appear.
Activating/deactivating the security code
1. If you would like to activate or deactivate the security code for the TravelPilot
DX-V, select "Security code". Press
A menu in which you must enter the code number will appear.
2. Mark the first digit in the code number. Press
Repeat for the remaining digits in the code number. Then mark "OK" and
press .
OK
If you have entered and confirmed an incorrect code by mistake, you will not
be able to repeat your entry until a waiting period has elapsed. During this
period, the TravelPilot DX-V must remain switched on. "SAFE" will appear in
the input field.
Switching the operating introduction on/off
1. If you would like to switch the TravelPilot DX-V operating introduction on or
off, select "Operations info". Press
The operating introduction is active if it is marked by a checkmark.
.
OK
.
OK
.
OK
.
OK
60