Table of Contents
Advertisement
Screen House and accessories full instructions
!
This is not a toy. Children should not be left unattended with the product. Injury or
death may result from fire if the fabric is exposed to open flame. Take care opening
or unfolding any part of this product as moving or folding parts could trap fingers.
Read before use
• When erecting the screen house , always ensure the roof joint (the large black steel joint) is
on the floor and never in the air as this can lead to turning the screen house inside out.
• The screen house frame is made to be easily erected, but take care when erecting and taking
down the screen house. Always ensure that nothing is twisted or caught in the frame.
• NEVER force the frame, it will open or close without the need for undue force. Applying undue
force could damage the frame and would invalidate your warranty.
• Although extremely easy we recommend that you put this screen house up and down a few
times at home or in an area such as a basement or garage before putting it up outside. This
allows you to get used to the process before putting it up in an area that could be exposed to
wind and rain.
• The screen house can be put up by one person, but it is easier to erect with two people.
• We recommend that you always peg the screen house down with both the screen house
pegging points and the included storm straps.
Screen House Pro Only
• The screen house pro models feature sewn and zipped in external walls. These simply zip shut
and can be unzipped and rolled up to expose the mesh sides of your screen house.
• Accessory zip(s). The Screen House Pro models also feature an accessory zip located around
the door(s). These allow the addition of optional extra.
• The Screen House 6 Pro also has two doors, one at the front and one at the rear. The front
door can be identified by the logo printed above it and the rear door can be idenfied as it does
not have a logo above it.
Care and Cleaning Instructions
Never use and harsh or abrasive cleaners or brushes when cleaning this product as the frame
and fabric may be damaged when doing so. Never fold and put the product away when wet as
this can trap water in the product, which can lead to mould and mildew build up.
IMPORTANT: After cleaning your screen house you must reproof the screen house as the cleaner
may well remove the coating on the fabric. We recommend you use a dedicated re-proofing
spray.
• Fabric : We recommend using a dedicated awning or tent cleaner for the fabric, if one is not
available simply warm soapy water. After it has been cleaned, rinse with clean water to make
sure there's no soap or cleaner left inside the fabric. Once rinsed allow the product to dry
naturally before folding away and storing.
• Frame : First allow any dirt to dry and brush with a soft brush to remove loose dirt. Once this is
done wipe the frame down with warm soapy water and a soft cloth. Once cleaned allow to dry
naturally before storing away.
• Bolts : There are small bolts on the screen house frame mechanism. These may become loose
after multiple uses, so just check that these are not loose, but never overtighten them as this
could lead to damage and may invalidate your warranty.
Instruction version: 5
3
Advertisement
Table of Contents
