Bissell STAIN ERASER PET 2006F User Manual page 12

Clean the Brush
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect from
charger before performing maintenance or troubleshooting.
1
Disposal of Batteries
WARNING
This product contains Lithium Ion rechargeable batteries. Proper removal and
disposal of batteries is required.
NOTICE: Disconnecting the battery will destroy the appliance and invalidate the
guarantee.
Before proceeding, ensure that:
-the unit is disconnected from the charger
-the clean water tank, collection tank, nozzle and brush have been removed
from unit (see removal instructions)
-you have a flat head and Phillips screwdriver, required for disassembly
1
Remove the cover on the base of the
unit by using a flat head screw driver.
12
www.BISSELL.com.au
Ensure the unit
is OFF and set
upright on a
countertop or flat
surface. Remove
the scrubbing
brush by lifting the
tab up and pulling
gently to release.
2
2
Remove the screw near the LED window
using a Phillips screwdriver. Then, remove
entire top handle portion from unit by
using a flat head screwdriver.
Rinse brush with
clean water and
check brush for
debris. Once
cleaned, insert brush
by aligning the top
of the brush into the
unit and snap into
place. Ensure it is
secure before using.