Editing Channel Alias Name - Motorola XT460 Display User Manual

Note: If the Maximum Channel (MAX CHAN)
setting in the radio is set to '1', the Scan
Programming option is disabled and will not
show on the radio display.

Editing Channel Alias Name

To edit a Channel Alias Name, turn ON the
radio and press and hold the PTT button
simultaneously with the
seconds. The radio generate a special beep
upon entering the 'Channel Alias Mode'.
The radio display shows the current channel
alias name and channel number blinking as
follows:
Choose the channel number you want to edit
by rotating the Channel Selector Knob. Once
you have selected the channel number, short
button for 3
press the PTT button or
start editing the channel alias name.
• The character to be changed starts blinking. If it's
a blank character, a cursor starts blinking.
• To change character, press the
buttons until the desired character is reached. To
move to next character on the right, press the
(Menu) button. The character sequence is
[A-Z], " " (Blank Space), [0-9] and Special
Characters. No lower case is allowed.
Long press the PTT button to save and go back
to the 'Channel Alias Mode' to choose other
channel to edit the alias name or turn OFF the
radio to exit without saving the changes.
Note: If the channel alias name is left blank, long
pressing the PTT button does not save or
leave the alias name.
(Menu) button to
and
39
English