MANUFACTURER APPLIANCE DATA PLATE Model WATER COOLERS Supply voltage Mod....Quantity cooling Class ..V ..Hz ..W ..A Total absorption Frequency Freon R134a kg..... Classe Serial number MADE ITALY Construction year-month 000100 0102 CONFORMANCE STATEMENT This appliance been manu- factured...
BEFORE USING APPLIANCE Use machine these conditions could cause fires electric shocks. Failure comply with these safety regulations could • Periodically disconnect machine from socket clean plug cause fires, electric shocks damage machine socket with cloth. • PLACE OF INSTALLATION If machine connected place...
DESCRIPTION OF THE APPLIANCE These water coolers were designed to provide large quantities of still and carbonated Two types of water coolers are available: cold water and water heated to 95°C. - Countertop (1) - Undercounter (2) They are easy to use and manufactured using top quality materials, offering the utmost hygiene and ease of maintenance;...
Page 5
GENERAL VIEW 5.6 (GB) Undercounter models JE1610-040b Casing Cold water thermostat easily removable to reach interior parts Hot water thermostat (H models) Distribution spout Hot water switch (H models) positioned in the protected area Mains water inlet UV window ø 8mm or 3/4_M (TOP models) Small tank to collect dripping water.
Page 7
30 H 30 WG IN 30 A IN 30 H IN 30 45 A 45 H 45 WG IN 45 A IN 45 H IN 45 30WG 45 WG Lt/h 30 (8) 30 (8) 45 (8) 45 (8) Water production usg/h 7.9 (2.1) 7.9 (2.1) 11,9 11.9 (2.1) 11,9 11,9 11.9 (2.1) 11,9 °C 3 ÷ 10 3 ÷ 10 3 ÷ 10 3 ÷ 10 3 ÷ 10 3 ÷ 10 3 ÷ 10 3 ÷ 10 3 ÷ 10 3 ÷ 10 3 ÷ 10 3 ÷ 10 Water outlet temperature (95 max)
0701-010 JEtsilver and black JE1610-130 INSTALLATION 5.1 POSITIONING THE APPLIANCE 5.2 WATER CONNECTION TO THE MAINS Position the appliance in the point of installation, away from sources of heat and Before making the water connection, make sure the mains water pressure is between...
FILL ICE BANK JE1610-070x JE1610-0021 Connection to the water mains is done using the T tube provided (8 mm diameter) and 5.3.1 Water connection by terminal A (3/8M) for 8 mm pipe. Push pipe onto coupling 11 exerting the correct amount of pressure. The end piece A (3/8”) should be connected to the water mains using a stop cock R.
Page 10
Fili Fili Fili Fili JE1610-080 STARTING ELECTRICITY CONNECTION Warning! Before using machine proceed with sanitation Connection mains electricity supply carried connecting plug (see relative paragraph) mains socket. supply socket must equipped with efficient earth plate must sized Warning! appliance been laid down turned...
Page 11
Fili Fili Fili Fili JE1610-0009 SETTING UP THE SPARKLING WATER (WG models) NI1604-160 NI1604-170 6.1 CO GAS CYLINDER CONNECTION (CARBON DIOXIDE) • The cylinder is positioned outside the appliance. With rechargeable cylinders (B-RIC), proceed as follows: • Connect the pressure reducer P to the fitting 12. • Paying special attention to the seal, screw the pipe union on the pressure reduction With disposable cylinders (non-rechargeable), proceed as follows:...
Advice using appliance carbonated water NOTICE guarantee correct operation pump time, appliance must always CAUTION! AFTER TRANSPORTING, STORING AND USING CO CYLINDERS, operated with water cooling circuit. FOLLOW LOCAL REGULATIONS CONCERNING THEIR USE. mains water insufficient, protection system intervenes blocks pump functioning (the...
JE1610-0007 Maintenance operations sh ould be carried out by a quali professional. Be careful also not to dama e the r efri erator s stem cir ROUTINE MAINTENANCE Object How often Cleaning the mechanical water filter • Disassemble the fitting on the water inlet and remove any impurities.
Maintenance operations should be carried out by a qualified professional. What Operazione Periodicita’ Check carbonation pump • Disconnect the pump from the electric motor and check the rotor turns - Six-monthly freely. If it is stiff or blocked remove the scale inside the rotor using a de-scaling solution for food use Water replacement in the ice bank tank •...
JE1610-3254 JE1610-0001 JE1610-0002 JE1610-0004 JE1610-0003 Attention : carry this other maintenance operation requiring machine casing opened , protective gloves avoid being sharp edges sheet steel Achtung : für diesen Wartungseingriff müssen, für alle, Öffnen Maschinengehäuses erfordern, 8.3 HOW TO REPLACE THE UV LAMP Attention! direct irradiation of the UV lamp is dangerous both The lamp must be replaced every 6000 hours of working for the eyes and for the skin...
COOLING SYSTEM ANOMALY POSSIBLE CAUSE INTERVENTION the compressor will - power failure - check that there is voltage in the plug not start - thermostat on the off position, or set to the mini- - adjust the thermostat position - faulty thermostat - replace the thermosta - the over-load protection of the compressor is faulty - replace it - the starting relay is faulty - replace it - the starting capacitor is faulty - replace it - the compressor is faulty - replace it the water is cold but - little ventilation - place the appliance away from the wall the appliance is ope- - the condenser is dirty or covered - clean the condenser or free it of its obstacles...
Need help?
Do you have a question about the Cosmetal J Class 30 and is the answer not in the manual?
Questions and answers