Garmin VIEO RV51 Installation Instructions Manual

VIEO
™
INSTALLATION
INSTRUCTIONS
Important Safety Information
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
Failure to follow these cautions could result in damage to the
vehicle or poor product performance.
This device must be installed according to these instructions.
Disconnect the vehicle's power supply before beginning to install
this product.
Before applying power to this product, make sure it has been
correctly grounded according to the installation instructions.
You must read all installation instructions before beginning the
installation. If you experience difficulty during the installation,
contact Garmin Product Support.
®
Connector Identification
Connector Identification (Vieo RV 51)
Item Label Description
ZONE 1 Line out
LINE OUT connectors for
zone 1
ZONE 2 Line out
LINE OUT connectors for
zone 2
None Wiring harness
connectors
None AM/FM antenna
connector
SiriusXM SiriusXM
®
USB (500 mA)
iPhone/iPod USB (1 A)
May 2020
RV 51/52
WARNING
NOTICE
Connector Details
Left (white), right (red), and
subwoofer (orange)
RCA connectors
Left (white), right (red), and
subwoofer (orange)
RCA connectors
Connects to the included and
optional wiring harnesses
Connects to either the vehicle's
AM/FM antenna cable or an
inline adapter attached to the
vehicle's AM/FM antenna cable
port Connects to a compatible
SiriusXM Connect vehicle tuner
and antenna (sold separately)
Reserved for manufacturer use
Compatible only with low-current
(<500 mA) USB devices
Interfaces with and charges
supported smartphones and
USB devices
Item Label Description
AUX 1 Auxiliary input 1
INPUT
CAMERA Input for camera
AUDIO audio
INPUT
None RJ-45
CAN 1 CAN BUS 1
CAN 2 CAN BUS 2
VIDEO IN Analog camera
video input
MIC Microphone input 3.5 mm mono microphone port
Connector Identification (Vieo RV 52)
Item Label Description
ZONE 1 Line out
LINE OUT connectors for
zone 1
ZONE 2 Line out
LINE OUT connectors for
zone 2
None Wiring harness
connectors
AM/FM/DAB AM/FM/DAB
connector (default
source)
FM/DAB Connector for
alternate FM, FM
and DAB, or DAB
antenna
USB (500 mA)
iPhone/iPod USB (1 A)
AUX 1 Auxiliary input 1
INPUT
CAMERA Input for camera
AUDIO audio
INPUT
GUID-4F264AA7-30E5-4F0C-AD74-0C8DE09EE764 v1
Connector Details
Left (white) and right (red) RCA
connectors
Left (white) and right (red) RCA
connectors
Supports Ethernet connectivity
Connects to RV control systems
using an adapter (sold
separately)
Reserved for vehicle integration
Connects to supported chassis
CAN systems using an adapter
cable to support steering wheel
controls
4 RCA video connectors
Connects to up to four vehicle
cameras, including forward, left
view, right view, and backup
cameras
Connects to the included
microphone for hands-free
calling
Connector Details
Left (white), right (red), and
subwoofer (orange)
RCA connectors
Left (white), right (red), and
subwoofer (orange)
RCA connectors
Connects to the included,
optional wiring harnesses
Connects to a compatible
antenna. Must be used for AM
band (default)
Connects to a dedicated FM,
FM and DAB, or DAB antenna if
reception is not covered by the
AM/FM/DAB antenna (requires
menu reconfiguration)
Reserved for manufacturer use
Compatible only with low-
current (<500 mA) USB devices
Interfaces with and charges
supported smartphones and
USB devices
Left (white) and right (red) RCA
connectors
Left (white) and right (red) RCA
connectors