Working with the notebook
Switching on the notebook via the port replicator
► Press the ON/OFF button on the port replicator to switch the notebook on.
You can configure the function of the ON/OFF switch under Windows (see
the ON/OFF button", Page
the notebook and to the ON/OFF switch of the Port Replicator.
Switching off the notebook via the Port Replicator
► Close all applications and shut down your operating system (please refer
to the manual for the operating system).
If the notebook cannot be shut down properly, press the ON/OFF switch on the notebook
for about four seconds. The notebook will switch itself off. Any data not saved may be lost.
Disconnecting the notebook from the Port Replicator
► Disconnect the supplied USB cable (USB Type-C) from the USB 3.1 Gen
1 port (USB Type-C) of the notebook.
58
24). The settings apply both to the ON/OFF switch of
"Programming
Fujitsu