Advertisement
4. CONNECTING THE CONTROLLER TO AN ANDROID
TABLET
Connect the game controller to your tablet using the supplied USB cable. When using
Android devices you may require USB OTG to USB 2.0 Adapter Cable compatible with
your Android device (not included).
Confirm that your tablet supports external USB devices by connecting your own USB
mouse or a keyboard and checking their functionality. Also confirm that you can safely
place your tablet on the stationary bike.
The controller operates as a standard HID device, therefore does not require any special
drivers. When powered and running the status LED on the side of the controller box will
turn on green.
Once you connect the controller the interface should be operational (Please note that for
some games in-game configuration may still be required). If the controller is not
detected by the game try disconnecting the controller and reconnecting it. Also try
restarting a game while the controller is connected. Disconnect the controller when not
in use.
Once connected verify the operation of Cyber ExerCycle:
Pressing "Z" button on the joystick should make the LED on the controller turn
•
solid green.
Moving the magnet close to the sensor forces the status LED to turn sold green.
•
As you move the magnet away, the status LED should start blinking again.
8
Advertisement
