Advertisement
Verify the operation of Cyber ExerCycle:
Pressing "Z" button on the joystick should make the LED on the controller turn
•
solid green.
Moving the magnet close to the sensor forces the status LED to turn sold green.
•
As you move the magnet away, the status LED should start blinking again.
Open Game Controller Properties and try different controller inputs such as
•
pressing buttons, shaking the joystick. When pedaling you should see the Y Axis
of the display move.
As you pedal forward on your bike the small cross should move up (reach the top
•
when you pedal fast). As you stop pedaling the cross should move back to the
center (within few seconds).
This version of the controller only emulates joystick interface. This version does not
provide keyboard or mouse emulation. You can play PC racing games that use joystick
interface. In game configuration may be required to match the game controls to the
controller actions.
7
Advertisement
