Installing Cyber Exercycle On Your Bike; Connecting The Game Controller To The Pc - Cyber ExerCycle User Manual

2. INSTALLING CYBER EXERCYCLE ON YOUR BIKE

Connect Cyber ExerCycle to your exercise equipment in three steps:
1. Attach the sensor and the magnet to the pedals of your bike
2. Mount the controller to the frame of your bike.
3. Plug the controller into a USB port of your computer.
Attach the sensor to the stationary parts of the bike. Run the sensor cable up the frame.
Wrap the cable around the frame if required, so that the cable is not loose. Ensure that
the cable will not get tangled in the pedals. Note the orientation of the sensor to get
correct forward pedalling direction.
Mount the magnet so that it does not interfere with the sensor (ensure that the
minimum distance between the sensor and the magnet is between 0.25" to 1").
If the crank arm is made our of steel, the magnet may simply stick to the metal.
Optionally use double sided tape to attach the magnet.
As you move the pedals the magnet should come close to the sensor once per full
rotation on the crank set.
3