Table of Contents
Advertisement
Quick Links
Models-
9217, 9218 Coin Operated & 9237 Push button
Dual and Single Hose, Post Mount Vacuums
Page 2
Page 3-4
Page 5
Page 6
Page 6-8
Page 9-10
Page 10
Page 10
Page 11
Page 12-19
Page 20-21
1
Product Information
Product Dimensions
Specifications
Important Safety Instructions
Installation
Programming
Operating
Maintenance
Troubleshooting
Parts List
Wiring Diagram
REV 6-11-2019
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for J.E. Adams 9217
Summary of Contents for J.E. Adams 9217
- Page 1 Models- 9217, 9218 Coin Operated & 9237 Push button Dual and Single Hose, Post Mount Vacuums Page 2 Product Information Page 3-4 Product Dimensions Page 5 Specifications Page 6 Important Safety Instructions Page 6-8 Installation Page 9-10 Programming Page 10...
-
Page 2: Product Information
There may be more than one key number depending on unit. Please keep this information with your records. MODEL#:____________________________ SERIAL#:____________________________ KEY NUMBER(S):_____________________ DATE PURCHASED:___________________ DISTRIBUTOR:_______________________ J.E. Adams Industries 1025 63rd Ave. S.W. Cedar Rapids, IA 52404 1-800-553-8861 www.jeadams.com REV 6-11-2019... -
Page 3: Product Dimensions
PRODUCT DIMENSIONS 9217 VAC REV 6-11-2019... - Page 4 PRODUCT DIMENSIONS 9218 VAC REV 6-11-2019...
-
Page 5: Specifications
Specifications Unit specifications: 3 MOTOR VACUUMS Voltage: 120vac, 60hz Amperage: (1) 30 amp service is required for this unit. Weight: 140lbs with pallet attached. Vac specifications: Motors: (3) 120vac vacuum motors. Fuses: (3) 10 amp inline fuses. ______________________________________________________________________________________________ Unit specifications: 3 MOTOR VACUUMS, 220V Voltage: 220v, 50hz Amperage:... -
Page 6: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE) WARNING – To reduce the risk of fire, electric shock, or injury: • Do not use on wet surfaces. •... - Page 7 Attach vacuum can to post using 35000-11A post pictured supplied (8) 3/8 Torx Security bolts (T45 security tip not provided). Vacuum is heavy!! Use assistance! Vacuum hose installation: 1) Cut vacuum hoses to desired lengths (not too tight, not excess slack, leave a gradual bend).
- Page 8 Remove cover and make conduit connection at hole provided (seal tite type fitting not provided). Tie into factory electrical at this location. REV 6-11-2019...
- Page 9 Programming: JE Adams post mount vacuums come with non accumulating timers. If offering a free vacuum with a push button start, number of coins will be set to 1. If using a coin mechanism, select whatever combination of coins from 1-15 quarters.
- Page 10 Bill acceptor: Bill acceptor comes pre programmed from J.E. Adams and should not require any changes. If additional programming is needed to acceptors please refer to additional literature sent along with this unit. Operating Instructions: • Insert coin(s) into machine to start.
-
Page 11: Troubleshooting
Troubleshooting: !DISCONNECT POWER BEFORE SERVICING OR TROUBLESHOOTING! Problem Possible cause Solution Unit is not powered. Breaker inside fuse panel is not in the on position. Turn breaker on. No power to machine. Check incoming power line voltage. Loose connection. Check incoming power connection. Machine is behaving Is the incoming power at 120V? Check voltage and monitor while machine runs. - Page 12 REV 6-11-2019...
- Page 13 REV 6-11-2019...
- Page 14 REV 6-11-2019...
- Page 15 REV 6-11-2019...
- Page 16 REV 6-11-2019...
- Page 17 REV 6-11-2019...
- Page 18 REV 6-11-2019...
- Page 19 REV 6-11-2019...
- Page 20 REV 6-11-2019...
- Page 21 REV 6-11-2019...
Need help?
Do you have a question about the 9217 and is the answer not in the manual?
Questions and answers