Basic Operation; Charging The Battery; Power On - Transcend 630 User Manual

Before using the T.sonic
at least 12 hours by plugging it into a computer using the Mini USB to USB A-Type cable.

Charging the Battery

Plug the small end of the Mini USB to USB A-Type cable into the Mini USB connector on the T.sonic
and plug the large end of the cable into an available USB port on your desktop, or notebook computer.
The T.sonic ™ 630's internal Li-ion battery will begin charging.

Power ON

Press and Hold the "PLAY/PAUSE/PWR ON-OFF" button
animated logo will appear on the OLED Display. After the startup screen disappears the player will revert
to the default MUSIC Mode screen, you can now begin to use the T.sonic
It takes a few seconds to Power ON the unit.
When powering on the unit, if the LOCK icon
™ 630's "LOCK" switch
T.sonic
Power ON the T.sonic

Basic Operation

™
630 for the first time you need to charge the internal battery for
Figure 3. Connecting to a Computer
is on. You must switch off the "LOCK" before you can
™
630.
to Power ON the T.sonic
™
appears on the OLED Display, this means that the
7
™ 630. An
630.
™
630