Prism Rotate Motor - Philips VARI-LITE VL4000 Service Manual

Prism Rotate Motor

Vari-Lite Part No: 44.9704.1213
To replace prism rotate motor:
Step 1. Remove prism rotate belt following procedure in
Step 2. Loosen 1 x 6-32 x 3/16" cone set screw and remove collet and spacer from shaft.
Step 3. Slide prism arm and spacer off shaft.
Step 4. Remove 4 x M3 x 5mm PFZ screws and remove motor.
Step 5. Loosen 2 x 6-32 x 3/16" cone set screws and remove pulley and spacer from shaft.
Note:
Drawing exploded and some
components removed for clarity.
Step 6. Replace in reverse.
02.97 04.601 0 A
Note: All procedures are done with the power completely removed. Adhere to all warnings in this manual.
S
ERVICE
Prism Rotate
Prism Rotate Motor
Motor Screw (x4)
Rotate Pulley
P : O
ROCEDURES PTICS
"Prism Arm Belt" on page
Pulley Cone
Set Screw (x2)
Spacer
Spacer
2
C
OMPONENTS
91.
Collet Set
Screw
Collet
93