Lenticular Arm Belt - Philips VARI-LITE VL4000 Service Manual

Lenticular Arm Belt

Vari-Lite Part No: 54.9704.6316
To replace lenticular arm belt:
Step 1. Remove lenticular lens belt following procedure in
Step 2. Loosen 2 x 6-32 x 3/16" cone set screw and remove rotate pulley and spacer from shaft.
Step 3. Loosen 2 x 4-40 x 5/16" PPZ SEMS screws through slots and loosen arm belt motor tension.
Note:
Drawing exploded and some
components removed for clarity.
Step 4. Remove lenticular lens arm from motor shaft.
Step 5. Remove belt.
Step 6. Replace in reverse.
02.97 04.601 0 A
Note: All procedures are done with the power completely removed. Adhere to all warnings in this manual.
S
ERVICE
Motor
Pulley
Belt
P : O
ROCEDURES PTICS
"Lenticular Lens Belt" on page
4-40 x 5/16" PPZ SEMS Screw (x3)
Set Cone Screw (x2)
2
C
OMPONENTS
83.
85