Citizen 6070 Setting Instructions

Citizen Movement Calibers 6070 / 6075
Setting Instructions

To Set the Time

If you have not yet set the date correctly:
1) Pull the crown out two clicks.
2) Turn the crown clockwise until you see the date start to change.
Take note of the time and note this as a "night time" reference. Example: If the date starts to change at
11:55, think of this as 11:55 pm. This will enable you to ensure the date will change at night, and not
during the middle of the day.
3) Set the time to the current time, remembering that the watch now mechanically thinks the watch it is
"night".
4) Once the correct AM or PM time is set, push the crown in one click.
5) Rotate the crown counter-clockwise to set the date.
NOTE: Be sure not to change the date between 11:00 p.m. and 2:00 AM, otherwise the calendar
mechanism could become damaged.
6) Return the crown to the normal (closed) position next to the case.
If the date has been set correctly
1) Pull the crown out two clicks.
2) Rotate the crown in either direction to set the time.
3) Return the crown to the normal(closed) position next to the case.
To Set the Date only to adjust for months less than 31 days.
The date on this feature must be manually adjusted for months shorter than 31 days. Be sure not to change the
date between 11:00 p.m. and 2:00 AM, otherwise the calendar mechanism could become damaged.
1) Pull the crown out one click.
2) Turn the crown counter-clockwise to advance the date.
3) Return the crown to the normal (closed) position next to the case.
continued