Interface Description - AFX SPOT100-LED User Manual

INTERFACE DESCRIPTION

Main Interface
081T
EN
001
DMX
RDM
Set
Manu Sys Advan
SUBINTERFACE
Setting
Option
Run Mode
DMX Address
Channel Mode
Top Lamp Temp
Sound Regulator
Invert Pan
Invert Tilt
Pan-Tilt Swap
Pan-Tilt Encoder
RDM
No DMX Signal
Display
Lamp On@Startup
Load Default
Display inversion at 180°
Interface Language
Description
Slave status: Receive DMX signals from the console or
DMX
Master
Sound
Auto run ;
Random
Master status: Auto run and send DMX signal to slave
Auto
Press "OK" key to enter into edit status. Then press "UP"
001-512 "DOWN" to change DMX address. Press "OK" to save and
exit edit status.
Std.14CH Standard 14 Channel Mode
001-110
-006 --- +006
OFF
ON for starting and ending, the default is OFF.
ON
OFF
ON for starting and ending, the default is OFF.
ON
OFF
ON Exchange Pan/Tilt channel (include Pan/Tilt Fine)
Use encoder (optocoupler) to determine out of step and
ON
automatically correct position
OFF Correct position without encoder (optocoupler)
ON Support RDM function
OFF
KEEP Continue running as it is
CLEAR All motors return to the position and stop running.
ON
OFF
OFF
ON
Press the "OK" button to see the confirmation dialog,
press "OK" again. The key restores the default settings
www.afx-light.com
5 EN