Turning On The Main Unit - Sony Vision Exchange PEQ-C100 Help Manual

Hide thumbs Also See for Vision Exchange PEQ-C100:

Table of Contents

Help Guide (for end users)

Vision Exchange Version 1.3

PEQ-C100/PEQ-C130/PES-C10

Turning on the Main Unit

Use the following startup procedure when using the main unit.

Hint

If Pod power supply operation is linked to the main unit, the specified Pod will turn on when the main unit is turned on. The power

supply link setting is configured on the [Pod Sharing] page of the [Setting] screen.

Turn on the displays connected to the main unit.

Press the power switch on the front panel of the main unit.

When power is turned on, the LED around the switch is lit green.

To shut down

Press

in the bottom right of the screen to display the [Shut down] dialog box, and press [OK].

Table of Contents

Vision exchange peq-c130 Vision exchange pes-c10