Advertisement
Quick Links
For technical assistance or troubleshooting
please call 1-855-994-2825 or visit www.sibrandssupport.com
This product Wall Mount frame is intended for use only with an apparatus which has a maximum weight of 132 lbs. See apparatus
instructions. Using with an apparatus heavier than the maximum weight indicated may result in instability and cause possible
injury.
READ THIS FIRST Read this entire manual! Do not attempt to install this product if you do not understand the instructions.
Contact a qualified mount installer if you have any doubts about a safe and secure mount installation, or if you are not sure what
specific wall materials you are attaching this mount to. Check all the parts carefully to make sure there are no missing or
damaged parts. Improper installation may result in damage to your TV, property, and personal injury.
Tilting Flat Panel
Wall Mount
Installation Guide
Model: AXT2650
• Supports most 26"-50" Televisions
• Maximum weight capacity: 132 lbs.
• Supports VESA sizes up to: 600x400
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Atak AXT2650
Summary of Contents for Atak AXT2650
- Page 1 Tilting Flat Panel Wall Mount Installation Guide Model: AXT2650 • Supports most 26”-50” Televisions • Maximum weight capacity: 132 lbs. • Supports VESA sizes up to: 600x400 For technical assistance or troubleshooting please call 1-855-994-2825 or visit www.sibrandssupport.com This product Wall Mount frame is intended for use only with an apparatus which has a maximum weight of 132 lbs. See apparatus instructions.
- Page 2 ATAK...
- Page 3 Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. NOTE: Not all hardware included will be used. Spacers TV Brackets TV Screws M4x12mm M8x22mm M4x30mm...
- Page 4 1-3 Attach the TV Brackets Screw and washer Spacer(s), screw and washer Tips: If you need to combine M8(d/h) screw with 2.5mm spacer(n), you have to remove the inner circle of Spacer (n).
-
Page 5: Wood Stud Installation
For wood stud installation, follow STEP 2A For concrete installation, follow STEP 2B on PAGE 6 Parts and Hardware Lag Bolt M8x60mm Allen Key M8 Washer Wall plate Socket tool Do not use in drywall or wood CAUTION: Concrete Wall Anchor 4pcs Wood Stud Installation Min. - Page 6 Use a pencil to mark the center of the Use a pencil to mark the mounting holes on the wall. Make sure the holes will be second stud. in the center of the stud and are level. 16"(406mm) Center line CAUTION : To avoid potential personal injury or property damage: All 4 lag bolts...
- Page 7 Solid Conrete Wall Installation Min. 8"(203mm) ELECTRIC LINE WATER LINE DANGER Use a pencil to mark the mounting holes on the wall. Use a 3/8” (10mm) drill bit to pre-drill holes at least 2.5” inches (64mm) deep at the marked locations. 3/8"...
- Page 8 Before hanging TV, please conduct "wall plate installation integrity test" first. 132 LBS (60 kg) Top of Bracket Pull Ribbon Down Lock Opens Release to Close Lock As the TV swings down and the lower part of the brackets come in contact with the wall mount plate, secure each bracket to the Mount plate by pulling down on the attached ribbon (one bracket at a time) to open the spring-loaded lock.
- Page 9 Tilting angle adjustment (0°/-8°): Pull TV to your desired angle then tighten the 2 Tilting Bolts (one Bolt on each Bracket) using the Allen key Tighten Loosen 0° -8°...
- Page 10 Pull down Using Two People: on the straps Carefully lift the TV off of the Wall Plate 650mm 610mm 0 °~ -8° MAX:600mm 39mm MIN:75mm 222mm MAX:400mm 420mm 158mm MIN:75mm...
- Page 11 We warrant this product to you, the original purchaser at the time of purchase printed on a dated store receipt from an authorized ATAK retailer and for a period of six-years thereafter that our wall mount product and all it’s parts and components are free of defects in material and workmanship under normal use.
- Page 12 ATAK 2018 PN: ATAK AXT2650 Rev 1.0 July 2018...
Need help?
Do you have a question about the AXT2650 and is the answer not in the manual?
Questions and answers