PEP PB-SIO4 Manual page 35

PB-SIO4
Figure 4-2: Rear View of the AD-SIO4
24
2
24
2
Connector BU5 is for use with the PB-SIO4. Connector BU6 is reserved for use with the
PB-SIO4A, another serial interface piggyback from PEP.
$ $
Note!
Always ensure that the correct connector of the adapter cable is
connected to BU5. See Table 3-4 for cable pinout.
$ $
Note!
For use with the PB-SIO4 ensure that there is no cable connected
to BU6. Failure to comply with this will result in misfunctioning and
possible damage to equipment.
Page 4 - 4
23
BU5
1
23
BU6
1
® PEP Modular Computers GmbH
Adapter AD-SIO4
USE FOR PB-SIO4
RESERVED
(see note below)
DO NOT USE
ID 19957, Rev. 0300