Choosing A Site; Housing Your Steriflo System - Davey Water Products Steriflo UV50 Installation And Operating Intructions

Preparing your system
On removing your Steriflo
components, especially the lamp, to ensure all are present and have not been
damaged in transportation. You should have:
1. Power supply control box with indicator light(s) and electrical flex.
2. UV lamp.
3. Treatment chamber with mounting bracket.

Choosing a Site

Choose a site with a firm mounting position. Allow room for removal of the lamp
and sleeve during servicing. Leave a chamber lengths space at the lamp
connector end for lamp removal. Installation can be horizontal (outlet facing
upwards) or vertical (outlet horizontal).
Housing your Steriflo
To protect your Steriflo
proof, frost free and has adequate ventilation. Allow for drainage, to avoid damage
to flooring etc., that over time may occur from leaking pipe joints or seals.
WARNING: Some insects, such as small ants, find electrical
devices attractive for various reasons. If your site or enclosure is
susceptible to insect infestation you should implement a suitable
pest control plan.
system from its carton you should check all
®
System
®
system from the weather, make sure the site is water
®
4