Introduction; Preparing Your System - Davey Water Products Steriflo UV50 Installation And Operating Intructions

Congratulations on your purchase of a high quality, New Zealand made Steriflo
Ultra Violet water treatment system. All components have been designed and
manufactured to give trouble free, reliable operation.
Your new Steriflo system incorporates a lamp failure system design feature that
®
enables you to be warned of a lamp failure by :-
1. A lamp failure LED
2. An audible alarm
In addition when the alarm "beeps" on and off, the lamp is due to be changed so
effective treatment is maintained. Flashing of the red LED indicates that the lamp
countdown timer is operating.
Before installing your new Steriflo
failures caused by incorrect installation or operation are not covered by the
guarantee. Your Ultra Violet water treatment system is designed to handle
clean water free of particulate matter. The system should not be used for
any other purpose without specific referral to Davey Water Products. The
use of the system with flammable, corrosive and other materials of a
hazardous nature is specifically excluded.
The appliance is not intended for use by young children or infirm
persons without supervision. Young children should be supervised to
ensure they do not play with the appliance.
NOTE: The quartz sleeve has been factory fitted, and there is no need to
remove these endcaps or sleeve on first installation. Before removing sleeve,
please read the Maintenance section of these instructions completely.
, please read all instructions carefully as
®
3
®