Cleaning The Micro-Hygiene Exhaust Filter; Cleaning The Hepa Hygiene Filter - Siemens VSQ8 User Manual

en Cleaning and servicing
After cleaning, refit the motor pro-
11.
tection filter into the appliance.
Lock the motor protection filter into
12.
place at the top.
Close the lid.
13.
Cleaning the Micro-Hygiene
exhaust filter
Tip: To achieve the best possible va-
cuuming results, clean or replace the
Micro-Hygiene exhaust filter
year. After vacuuming fine dust
particles, clean or replace the Micro-
Hygiene exhaust filter
guarantee the appliance's suction.
Switch off the appliance.
1.
Unplug the mains plug.
2.
Open the rear flap.
3.
Push the locking tab in the direc-
4.
tion of the arrow.
→ Fig.
19
Unlock the filter holder.
5.
Remove the foam filter
6.
Micro-Hygiene exhaust filter
the filter holder.
→ Fig.
20
Tap out the foam filter
7.
Micro-Hygiene exhaust filter
If it is very dirty, wash the foam fil-
8.
1
ter and the Micro-Hygiene ex-
1
haust filter .
→ Fig.
21
Leave the foam filter
9.
cro-Hygiene exhaust filter
for at least 24 hours.
Insert the foam filter
10.
cro-Hygiene exhaust filter
filter holder.
Insert the filter holder into the ap-
11.
pliance.
Close the rear flap.
12.
1
Depending on the appliance specifications
26
1
1
once a
1
in order to
1
and the
1
from
1
and the
1
.
1
and the Mi-
1
to dry
1
and the Mi-
1
into the
Cleaning the HEPA hygiene
filter 1
Note: The filtering action of the filter
remains intact, even if the filter sur-
face becomes discoloured.
Tips
¡ For optimum performance level,
clean the HEPA hygiene filter
once a year.
After vacuuming fine dust particles,
clean the HEPA hygiene filter
order to guarantee the appliance's
suction performance.
¡ To clean the filter unit thoroughly,
you can clean the filter unit in the
washing machine. To protect the
rest of the laundry, put the filter
unit into a laundry bag. Wash the
filter unit at 30 °C using a gentle
programme and the lowest spin
speed.
Switch off the appliance.
1.
Unplug the mains plug.
2.
Open the rear flap.
3.
Push the locking tab in the direc-
4.
tion of the arrow.
Release the HEPA hygiene filter
5.
Remove the HEPA hygiene filter
6.
from the appliance.
→ Fig. 19
Tap out the filter unit.
7.
Wash out the filter unit under run-
8.
ning water.
→ Fig.
22
Leave the HEPA hygiene filter
9.
dry for at least 24 hours.
Insert the HEPA hygiene filter
10.
the appliance.
Close the rear flap.
11.
1
1
in
1
.
1
1
to
1
into