Advertisement
Advertisement
Table of Contents
Related Manuals for EVO GEARS EG3
Summary of Contents for EVO GEARS EG3
- Page 1 EG3-Quick Start Guide What’s in the package?
- Page 2 Initial set up: The device uses a TF (Micro SD) memory card, maximum size allowed is 32GB. *Make sure the memory card is empty first time use. Insert the Memory Card into the card slot: If you have a USB power socket, connect the device to a USB Power Socket to power up the device.
- Page 3 * When the device is connected to USB charging cable or Cigarette Lighter, the camera will switched on automatically, and will start recording if the memory card is inserted. * Please press OK button to stop the recording. Basic Configuration – when device is powered on, press menu button to enter the configuration menu.
- Page 4 Connect the rear camera Connect the rear camera with the main camera (AV in Port): Once connected you will see the preview of the rear camera from the main camera screen:...
- Page 5 When the rear camera is connected, any recording will have two video files – one for the main camera and one for the rear camera. Operation: Connect the cigarette light charger into the cigarette lighter slot. Connect the charging cable to the camera. Turn on the Ignition, cigarette lighter start to supply power (you can see camera car charger red indicator will lights up.) Camera will turn on automatically and will start recording.
- Page 6 While recording, you can press OK button to stop recording, and • Press it again to start recording. When the camera is powered on, press the power button can turn off • the screen. Press again can turn on the screen. When the camera is powered, Press and hold the power button will •...
- Page 7 Please make sure that your device is fully charged because you connect the device to a PC via USB cable. Device allow you to a PC direct via a USB cable to transfer the videos. When it is connected, the device will be recognised as a MSD (Mass Storage Drive) in your PC and you can browse the video file like a hard drive.
- Page 8 Important: Battery On the device - Please be advised the battery that is installed in the device is for saving the device setting only and it is not designed for long standalone recording. The device will need to always connect to a power source for it to continue recording. Video playback on a Windows PC or MAC.
Need help?
Do you have a question about the EG3 and is the answer not in the manual?
Questions and answers