Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for EVO GEARS EG500
Summary of Contents for EVO GEARS EG500
- Page 1 EG500 What’s in the package?
- Page 2 Initial set up: Make sure the device as least has 50% of battery before use, if less the 50% please charge the device for 3-4 hours using a USB socket before use. The device uses a TF (Micro SD) memory card, maximum size allowed is 32GB.
- Page 3 * When the device is connected to USB charging cable or Cigarette Lighter, the camera will switched on automatically, and will start recording if the memory card is inserted. * Please press OK button to stop the recording. Basic Configuration – when device is powered on, press menu button to enter the configuration menu.
- Page 4 Connect the charging cable to the camera. Turn on the Ignition, cigarette lighter start to supply power (you can see camera car charger red indicator will lights up.) Camera will turn on automatically and will start recording in default.
- Page 5 When your switch off the ignition, cigarette lighter will stop supplying power, the device will detect this and automatically stop the recording and switch itself off. Parking Mode – This feature allow the camera to wake up and record a short video, when it detect any collision.
- Page 6 Once the device has finished the recording, it will go to sleep again. When the device detect the car cigarette lighter start to supply power, the device will switch on and if there is any event recorded during the Parking mode, the device will notify the user: Operation quick tips: While recording, you can press OK button to stop recording, and...
- Page 7 Connect to a PC: Please make sure that your device is fully charged because you connect the device to a PC via USB cable. Device allow you to a PC direct via a USB cable to transfer the videos. When it connect the device will be recognise as a MSD (Mass Storage Drive) in your PC and you can browse the video file like a hard drive.
- Page 8 Date & Time: set the date/time Auto Power Off: This option allows you to set a time out for the device to power off itself when it’s not recording. Auto Panel Off: This option allows you set a time out for the screen for it to go to sleep after a period of idle time.
Need help?
Do you have a question about the EG500 and is the answer not in the manual?
Questions and answers