Installation - Coleman 51807 User Manual

Congratulations on your Coleman Products Purchase. This product is designed to the highest technical specifications and
standards. It will supply years of maintenance free use. Please read these instructions thoroughly prior to installation,
then store in a safe place for future reference. If at any time you are unclear about this product, or require further
assistance please do not hesitate to contact our trained professionals operating the customer support line 1888-478-6435
or email to: info@sunforceproducts.com
7 Watt Solar 12V Battery Trickle Charger:
What's Included: 4 pre- drilled holes for easy installation, 4 stainless steel screws, 9.5 feet of wire, 12V DC plug, battery
clamps, Quick Connect Technology
Power Rating: Maximum rating 7 Watts (under ideal conditions)
Current: 467 mA @ 15 Volts
Features:
• Quickly connects and disconnects to the battery
• Overcharge and Discharge protected
• Does not need direct sunlight; amorphous solar panel will work in cloudy conditions
• Weatherproof design
• Durable – covered by a five year warranty.
• Conveniently comes with extension cable
• Maintenance free, lightweight compact design
Operating Instructions
For optimal power, ensure the panel is directly facing the sunlight.
WARNING:
Follow the below instructions carefully to not cause any bodily harm
•
Correct polarity must be observed for product to function properly and safely
•
Risk of fire, electric shock, and injury to persons if operating instructions are not followed
•
Any misuse or tampering of the product and/or any included accessories will void warranty and may cause bodily
•
harm
Follow all safety instructions provided by the battery manufacturer when handling 12V batteries. Always wear
•
safety glasses. Keep sparks, flames and cigarettes away from batteries at all times.

Installation:

Securely place the solar panel in the sun. Included mounting screws can be used if necessary for a more permanent
installation. Your 7 Watt Solar 12 Volt Battery Trickle Charger can be installed using either the 12V DC Plug or Alligator
Battery Clamps.
(1) Installation through 12 Volt DC Plug:
Plug the 12V DC Plug into the 12 Volt DC socket in vehicle. Make sure both ends are secure and aligned correctly. For
optimal power, ensure the panel (solar cell up) is directly facing the sun. The 12V Socket in the vehicle must remain live
when the ignition is in the "off" position for the solar panel to charge.
(2) Installation to Battery by Alligator Battery Clamps:
Connect the alligator clamps correctly by matching the red clamp which is Positive (+) to the Positive (+) terminal on your
battery. Connect the black Clamp which is Negative (-) to the Negative (-) Terminal on your battery.
WARNING: Alligator clips must be placed on the battery in the aforementioned order. Wrong connections may cause
sparking or explosion.
Note: This solar battery trickle charger has a built-in blocking diode to prevent discharge.
Maintenance Instructions: Cleaning of the glass may be performed by the user, utilizing a clean damp cloth. Any other
maintenance to the unit should be performed by qualified service professional or contact our experienced customer
service team.